JOAT 14.9 SFF Chassis (EOL)

- END-OF-LIFE-
- Do check out our latest development, the Encore (the JOAT 14.9's successor) on this webstore.

*You can cancel before the package is shipped, however, we will withhold 4% as payment processing fees. Do read our T&Cs on the website.

JOAT 14.9 SFF
The perfect no-fuss DIY SFF Chassis for BIG Air Cooling

- If you have chosen to customize the GPU Tag, please indicate what you would like on the GPU Tag (Up to 12 characters) on the checkout page.
- Refer to the 5th picture on this product page, you can customize the "YOURNAMEHERE".

FOR THE FULL COMPATIBILITY LIST, download the cheat sheet here:
https://cutt.ly/9gHKFFG

External Dimensions (LxWxH)
Without Protrusions: 325mm x 185mm x 247mm
Including Protrusions: 340mm x194mm x 262mm

Internal Dimension (LxWxH)
321mm x 177mm x 243mm

Volume
14.9L

Weight
1.4KG

Material:
Panels: Anodized Aluminium 6061 machined panels (2mm thick)
Corner Joints: Anodized Aluminium 6061 machined blocks
Assorted 3D-Printed parts
*The case is flat-packed and partially assembled. We recommend assembling the case concurrently with a PC build for the easiest experience.

Add-Ons
1) Front I/O (15SGD): USB 3.1 Gen 2 Type C 10Gbps (Terminates into Type-E plug at Motherboard end, please check if your motherboard is compatible)
*There will be a PCI Bracket provided as well so you can use this cable as additional rear I/O if your GPU is <2.5 slots.

2) GPU Tag (10SGD): You can customise "YOURNAMEHERE" up to 12 letters. The default is an empty plate with no wordings. Refer to picture 5 for a visual reference.

Hardware support
Motherboard: Mini-ITX
PSU: SFX/SFX-L(Custom cables necessary due to lower GPU clearance)
CPU Cooler: Up to 162mm
Popular CPU Coolers supported
- NH-D15 (Fans at the bottom position; flexible 24-pin cable needed)
- NH-U12A
- Fuma 2

GPU Clearance:
320mm Length
162mm Width (Do add 20mm on the width for PCIe power cables)
3-Slots Thick

Air Cooling Drive Compatibility:
4× 2.5" SSD/HDD
1× 3.5' HDD
*All 3 drive positions can be occupied with no compatibility conflict with other components apart from cabling.

Case Fans (Up to)
Rear: 120mm fan
Base: 2× 140mm
Side: 2x 140mm
Top: 1x 120mm (2x 120mm possible with PSU Position 3)

Radiators (Up to)
Rear: 120mm
Base: 280mm
Side: 280mm
Top 240mm

*When dual 280 radiators are used on the side and bottom, 90-degree rotary fittings are necessary on the GPU Block.

AIO Support:
For maximum compatibility, the side radiator position for AIOs is recommended.

For more information, please download and refer to the compatibility cheat sheet here: https://cutt.ly/9gHKFFG

Shipping information:

- The package weighs 1.95KG and has a dimension of 36cm x 30cm x 6cm

Please ensure all shipping and necessary contact information is correct. Do check it again in the confirmation e-mail sent after payment. SpyLabs will not be held responsible for any missing or undelivered packages if the address information is incorrect. 

- We ship to most countries:
If we don't ship there, then an error would pop up when you enter your location.

- Due to current global situations, shipping rates can fluctuate wildly. SpyLabs reserves the right to cancel any order at our discretion if we deem a particular location to be high risk or too expensive to ship to.

Here are the countries we don't normally ship to due to excessive postage fees.
*We can ship to these locations provided that you pay a lot more for shipping, do contact us if your country is one of the below.

Countries we don't normally ship to:
Brazil
Colombia
Bahrain
Mexico

*All the countries are gathered from the interest form, if your location is not available for checkout and is not part of the list of countries we don't normally ship to, do contact us and we will find a possible solution for you. It is highly likely that your country was not mentioned in the interest form and we did not find data for it.

All currency is in SGD, Singapore Dollar.